Xilinx ISE Four-Bit Adder in Verilog

--D. Thiebaut 11:03, 24 April 2012 (EDT)

---

This lab should be done after the introduction lab on Verilog. It shows how to use two modules, one for the basic 3-bit full-adder (adding a to b with carry-in), and one that uses 4 of them to create a 4-bit adder with an output carry.

Full-Adder in Verilog

Review

A full adder is a combinational logic that takes 3 bits, a, b, and carry-in, and outputs their sum, in the form of two bits, carry-out, and sum.

The figure below illustrates the circuit:

New Project

• The first task is start the Xilinx ISE and create a New Project. Let's call it FourBitAdder.
• Once the Project is created, add a New Source, of type Verilog Module. Call it MultiStages. It will contain 2 modules. The first one will be the 3-bit full adder.
• Define the ports as follows:
  • a, input
  • b, input
  • cin, input
  • s, output
  • cout, output

We now have several options to define the adder. One is functional, as illustrated in the next subsection. Next is a logical description, where we express the outputs in terms of their logical equation. The final is a gate level description. Pick the one that seem most interesting to you. They should all yield the same result in the next section, where we test them.

Functional Description of Full Adder

`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// MultiStages.v
//
//////////////////////////////////////////////////////////////////////////////////
module singleStage (
	 input a,
	 input b,
	 input cin,
	 output s,
	 output cout );
	 
	assign {cout,s} = a + b + cin;

endmodule

module MultiStages(
    input [3:0] a,
    input [3:0] b,
    output [3:0] sum,
    output carry
    );

endmodule

Logical Description of Full Adder

• Complete the code of the module so that it looks like this:

`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// MultiStages.v
//
//////////////////////////////////////////////////////////////////////////////////
module singleStage (
	 input a,
	 input b,
	 input cin,
	 output s,
	 output cout );
	 
         assign s = a ^ b ^ cin;
	 assign cout = (a & b)  |  (a & cin)  |  (b & cin);

endmodule

module MultiStages(
    input [3:0] a,
    input [3:0] b,
    output [3:0] sum,
    output carry
    );

endmodule

Gate-Level Description of Full Adder

`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// MultiStages.v
//
//////////////////////////////////////////////////////////////////////////////////
module singleStage (
	 input a,
	 input b,
	 input cin,
	 output s,
	 output cout );
	 
         // wires (from ands to or)
	 wire w1, w2, w3;
	 
         // carry-out circuitry
	 and( w1, a, b );
	 and( w2, a, cin );
	 and( w3, b, cin );
	 or( cout, w1, w2, w3 );
	 
         // sum
	 xor( s, a, b, cin );

endmodule


module MultiStages(
    input [3:0] a,
    input [3:0] b,
    output [3:0] sum,
    output carry
    );

endmodule

Check Module for Syntax Errors

• Click on the module file to select it in the Implementation window, and
• In the Process window, below the implementation window, double click on Synthesize, in the Implement Design menu.
• You should get this message in the console:

  Process "Simulate Behavioral Model" completed successfully

(If not, fix the bugs and retry!)

Generate a Test Module

• Add a New Source to the project, of type Verilog Test Fixture.
• Call it test.
• Specify singleStage as the target of the testing.
• Edit it as illustrated below:

`timescale 1ns / 1ps

////////////////////////////////////////////////////////////////////////////////
// Module Name:   Y:/Desktop/Xilinx Stuff/Projects/NBitAdder/test.v
// 
////////////////////////////////////////////////////////////////////////////////

module test;

	// Inputs
	reg a;
	reg b;
	reg cin;

	// Outputs
	wire s;
	wire cout;

	integer i;
	
	// Instantiate the Unit Under Test (UUT)
	singleStage uut (
		.a(a), 
		.b(b), 
		.cin(cin), 
		.s(s), 
		.cout(cout)
	);

	initial begin
		// Initialize Inputs
		a = 0;
		b = 0;
		cin = 0;
	end

	always @ ( a, b, cin )
		begin
       
                // generate truth table
		for ( i = 0; i < 8; i = i + 1 )
			begin
			#10 {a, b, cin} = i;
			
			end 
		#10 $stop;
		end

      
endmodule