CSC231 Lab 6

Back to CSC231 Weekly Schedule

CSC 231 Lab # 6

© D. Thiebaut, 2008

In this lab we are going to make the Arduino keep on listening to commands it gets from the assembly language on the PC, and execute each command as it receives them.

Getting the Messenger Library for the Arduino

You need a new library for the Arduino called Messenger

• Boot the Ubuntu CD-Rom
• Open a Terminal window and type

  sudo su
  cd 
  cd arduino-0010/hardware/libraries

• download the library file from the Arduino Playground:

  wget http://www.arduino.cc/playground/uploads/Code/Messenger.zip

• unzip the file

  unzip Messenger.zip

• Remove the archive file

  rm Messenger.zip

• Set the ownership of the new library the same ownership as that of the arduino software

  chown -R 1000:1000 Messenger

• Open the arduino GUI and create this new sketch

// This example sets all the values of the digital pins with a list through a callback function 

#include <Messenger.h>
// Instantiate Messenger object with the default separator (the space character)
Messenger message = Messenger(); 

// Create the callback function
void messageReady() {
    int pin = 0;
       // Loop through all the available elements of the message
       while ( message.available() ) {
	// Set the pin as determined by the message
         digitalWrite( pin, message.readInt() );
         pin=pin+1;
      }
}


void setup() {
  // Initiate Serial Communication
  Serial.begin(115200); 
  // Attach the callback function to the Messenger
  message.attach(messageReady);
}


void loop() {
  // The following line is the most effective way of using Serial and Messenger's callback
  while ( Serial.available() )  message.process(Serial.read () );
}

• Compile and download it to your Arduino

Assembly Part

• Open a Terminal window under Ubuntu and type

  sudo su
  cd

• Highlight the contents of the file driver.c and type Control-C to copy it to the clipboard
• In the terminal window type

  cat > driver.c

and then click the middle button of your mouse to paste the code you had highlighted

• Type Control-D to close the file.
• Repeat the same operations for the files
  • asm_io.inc
  • asm_io.asm
  • ledOn.asm