Difference between revisions of "CSC103: DT's Notes 1"

From dftwiki3
Jump to: navigation, search
Line 1,138: Line 1,138:
 
</bluebox>
 
</bluebox>
 
<br />
 
<br />
[[Image:Calculator.jpg|right|150px]]
+
[[Image:Calculator.png|right|150px]]
 
The processor has three important registers that allow it to work in this machine-like fashion: the '''PC''', the '''Accumulator''' (shortened to '''AC'''), and the '''Instruction Register''' ('''IR''' for short).  The PC is used to "point" to the address in memory of the next word to bring in.  When this number enters the processor, it must be stored somewhere so that the processor can figure out what kind of action to take.  This holding place is the '''IR''' register.  The way the '''AC''' register works is best illustrated by the way we use a regular hand calculator.  Whenever you enter a number into a calculator, it appears in the display of the calculator, indicating that the calculator actually holds this value somewhere internally.  When you type a new number that you want to add to the first one, the first number disappears from the display, but you know it is kept inside because as soon as you press the = key the sum of the first and of the second number appears in the display.  It means that while the calculator was displaying the second number you had typed, it still had the first number stored somewhere internally.  For the processor there is a similar register used to keep intermediate results.  That's the '''AC''' register.
 
The processor has three important registers that allow it to work in this machine-like fashion: the '''PC''', the '''Accumulator''' (shortened to '''AC'''), and the '''Instruction Register''' ('''IR''' for short).  The PC is used to "point" to the address in memory of the next word to bring in.  When this number enters the processor, it must be stored somewhere so that the processor can figure out what kind of action to take.  This holding place is the '''IR''' register.  The way the '''AC''' register works is best illustrated by the way we use a regular hand calculator.  Whenever you enter a number into a calculator, it appears in the display of the calculator, indicating that the calculator actually holds this value somewhere internally.  When you type a new number that you want to add to the first one, the first number disappears from the display, but you know it is kept inside because as soon as you press the = key the sum of the first and of the second number appears in the display.  It means that while the calculator was displaying the second number you had typed, it still had the first number stored somewhere internally.  For the processor there is a similar register used to keep intermediate results.  That's the '''AC''' register.
 
<br />
 
<br />

Revision as of 18:16, 1 August 2014

--© D. Thiebaut 08:10, 30 January 2012 (EST)
Last revised --D. Thiebaut (talk) 08:05, 9 October 2013 (EDT)




This section is only visible to computers located at Smith College













.