CSC231 Lab 6 2010

--D. Thiebaut 13:51, 25 October 2010 (UTC)

---

This lab covers sound files in the WAV format, and performing various operations on a sound file using array operations.

The Format of Sound Files

• The document https://ccrma.stanford.edu/courses/422/projects/WaveFormat/ covers the WAV format pretty well, and can be a source of additional information

Part 1

Get the code

• Get a copy of the required files
  • readWaveFileSkel.asm
  • wav.inc

or simply get them with getcopy

 getcopy readWavFileSkel.asm
 getcopy wav.inc

Get sound files

• Get some sample wav files:

 getcopy hello.wav
 getcopy goodbye.wav
 getcopy dratcomp.wav
 getcopy force.wav
 getcopy takeover.wav

• Note: There's more at http://buggerluggs.tripod.com/ie/wav-dir184.htm and http://www.duke.edu/~rfb/palace/wavs/dratcomp.wav. If you want to download more to your account, simply find the URL of a wav file, for example http://www.duke.edu/~rfb/palace/wavs/energize.wav, then type the following command at the prompt:

 wget http://www.duke.edu/~rfb/palace/wavs/energize.wav

Play the sound

• Play the files with aplay to make sure you can hear them:

aplay goodbye.wav
Playing WAVE 'goodbye.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono

• Important: make a note of the size of the samples, in this case 8 bits, unsigned.

Assemble, Link and Run

• Do not modify readWavFileSkel.asm yet. On its own it will create a new copy of the goodbye.wav under the name goodbye2.wav.

• Assemble and link the file

nasm  -f elf readWavFileSkel.asm
ld -o readWavFileSkel readWavFileSkel.o
rm goodbye2.wav
./readWavFileSkel

• Check that you now have a new file in your directory called goodbye2.wav

• Play it.

 aplay goodbye2.wav

(Note: on a mac, you can use afplay from the command line instead of aplay.)

You should hear the same thing as you did when listening to the goodbye.wav file.

Part 2

Test #1: Increase intensity, the simple way

• Make a copy of readWavFileSkel.asm and call it readWavFile1.asm

• Modify it so that you multiply the intensity of the sound by 2.

• Listen to the result. Can you understand the message?

Test #2: Increase intensity, the more sophisticated way

• You will have figured out that the previous method gives poor results. Instead try to figure out how we can mulitply an 8-bit sample by 2 in such a way that if the result is less than 255, we keep it as is, but if it is larger than 255, we force the sample to 255. In other words, figure out a way to implement this algorithm with the instructions you know:

     sample = buffer[ i ];
     sample = sample * 2;
     if sample > 255:
        sample = 255

• implement your solution in you readWavFile1.asm file, assemble, link, and listen to the result... Any better?

Test #3-a: Decrease Intensity

• Same thing, but this time you will divide the intensity by 2. A good way to divide by two is to shift the binary pattern to the right. For example, to shift right the contents of eax by one bit, do this:

         shr      eax, 1

Test #3-b: Decrease Intensity of a 16-bit Wav File

• Get a copy of guitar.wav:

 getcopy guitar.wav

• Play it with aplay
• Notice that it is a signed 16-bit sample wav-file.
• Rewrite your program for Test #3-a, and adjust it so that it works correctly wit the 16-bit sound file.
• Note: you will have to modify the size of the buffer in the file wav.inc to accomodate this larger wav file

Test #4: Twice the Sound

• Double up the size of the wav file, making it repeat the sound "goodbye" twice, so that you will hear "goodbye, goodbye".

Test #5: Adding an echo...

This will be Homework 6. You can start on it if you have time...

• Figure out how to implement the "graphic" algorithm shown above:
  • The original sound is Sound 1 ("goodbye" )
  • you copy it once in a new buffer, in the same location
  • you copy it a second time, decreasing its amplitude and adding it to the new buffer, with an offset of about 1500.
  • you copy it a third time, decreasing its amplitude some more, and adding it to the new buffer, with an offset of about 3000.
  • you copy the new buffer back into the wav buffer, and write the file to disk...