Difference between revisions of "CSC231 Homework 5 Fall 2017"

From dftwiki3
Jump to: navigation, search
 
Line 259: Line 259:
 
<br />
 
<br />
 
<br />
 
<br />
<onlydft>
+
<showafterdate after="20171107 00:00" before="20171231">
 
=Solutions=
 
=Solutions=
 
<br />
 
<br />
Line 508: Line 508:
 
</source>
 
</source>
 
<br />
 
<br />
</onlydft>
+
</showafterdate>
 
<br />
 
<br />
 
<br />
 
<br />

Latest revision as of 09:38, 7 November 2017

--D. Thiebaut (talk) 09:27, 30 October 2017 (EDT)



This assignment is due Monday 11/6/2017 at 11:55 p.m.
Note: you will not be given the ability to evaluate your program on Moodle, and see its final grade. For this reason, make sure you thoroughly test your programs before submitting them!



Preparation


For this assignment you will need to downloaded an updated version of 231Lib.asm, which has been augmented with a new function for reading strings.

getcopy 231Lib.asm

An example program using the new function, _getString(), is shown below:

;;; ; hw5Prep.asm
;;; ; D. Thiebaut
;;; ;
;;; ; Gets a string from the user and prints it back
;;; ;
;;; ; to assemble and run:
;;; ;
;;; ;     nasm -f elf  hw5Prep.asm
;;; ;     nasm -f elf  231Lib.asm
;;; ;     ld -melf_i386 -o hw5Prep hw5Prep.o 231Lib.o
;;; ;     ./hw5Prep
;;; ; -------------------------------------------------------------------

;;;  ------------------------------------------------------------
;;;  data areas
;;;  ------------------------------------------------------------

	        section .data
prompt		db	"> "

	
;;;  ------------------------------------------------------------
;;;  code area
;;;  ------------------------------------------------------------

	        section .text
	        global  _start
		extern	_getString
		extern	_printString
		extern	_println
	
_start:
                ;; prompt the user 
		mov	ecx, prompt
		mov	edx, 2
		call	_printString

                ;; get a string from the user
                ;; _getString returns the address of the string read in ecx,
                ;; and the number of chars read in edx
		call	_getString

                ;; since ecx and edx already contain the address and number
                ;; of chars, we can directly call _printString, which needs
                ;; the string and number of chars in the same registers
		call	_printString

                ;; print a line-feed char.
		call	_println


;;;  exit()

	        mov     eax,1
	        mov     ebx,0
	        int     0x80	; final system call


Create a version of this program in your account, and play with it. Verify that it gets a string from you and prints it back.

Notes


  1. _getString saves the string in an array declared inside 231Lib.asm. This array contains at most 1000 bytes.
  2. when _getString returns to your main program, it will set ecx to the address of the array containing the string, and it will set edx to contain the number of characters the user typed at the keyboard.
  3. the user indicates the end of the string by pressing the ENTER key. The string does not contain the ENTER character (line-feed).
  4. although I didn't do that here because the program is so simple and short, it is a good idea, just after returning from a call to _getString, to save ecx and edx into two different variables in memory that will hold the address of the string and the number of chars entered at the keyboard.


Problem 1


Write a program called hw5a.asm that prompts the user for a string, and prints it back several times. The number of times the string is printed is the same as the number of characters in the string.

Examples
cs231a@aurora ~ $ ./hw5a
> B
B
cs231a@aurora ~ $ ./hw5a
> a
a
cs231a@aurora ~ $ ./hw5a
> hello
hello
hello
hello
hello
hello
cs231a@aurora  $ ./hw5a
> chocolate
chocolate
chocolate
chocolate
chocolate
chocolate
chocolate
chocolate
chocolate
chocolate
cs231a@aurora  $ ./hw5a
> Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
 


Note


  • Your program does not have to handle 0-length strings. In other words, your program will not be tested with empty strings.


Submission


  • Submit your program in the Homework 5, Problem 1 section on Moodle.


Problem 2


Modify your solution program for Problem 1 so that it removes the last character of the previous printed string as it goes through the loop:

Examples
cs231a@aurora  $ ./hw5b
> Hall-o-ween
Hall-o-ween
Hall-o-wee
Hall-o-we
Hall-o-w
Hall-o-
Hall-o
Hall-
Hall
Hal
Ha
H
cs231a@aurora  $ ./hw5b
> a
a
cs231a@aurora ~/HWs/HW5/PB2 $ ./hw5b
> 123456789
123456789
12345678
1234567
123456
12345
1234
123
12
1


Submission


  • Submit your program in the Homework 5, Problem 2 section on Moodle.


Problem 3


Same as with Problem 2, but this time the triangle is reversed:

Example
cs231a@aurora  $ ./hw5c
> Hal-lo-we-en
H
Ha
Hal
Hal-
Hal-l
Hal-lo
Hal-lo-
Hal-lo-w
Hal-lo-we
Hal-lo-we-
Hal-lo-we-e
Hal-lo-we-en


Submission


  • Submit your program to the Homework 5, Problem 3 section on Moodle.


Problem 4


  • Write a program called hw4d.asm that prompts the user for a string, and displays the checksum of this string, in decimal.


  • The checksum of a string is the exclusive or of all the bytes in a string. This is an operation used mostly in communication, when bytes of data are sent over a network. In general, when a packet of bytes is sent, the exclusive or of all the bytes is computed, and sent at the end, as an extra byte. The receiving device, upon receiving the data, will compute the exclusive or of all the data bytes, and compare the checksum it computed to the checksum that was sent. If the two checksums are different, very likely a transmission error occurred and the receiving device will ask for the packet to be transmitted again.


  • Here is how you would compute the checksum of a string of 5 bytes: 0x41, 0x42, 0x43, 0x44, 0x45. I will use binary, as it is simpler:
 checksum <-- 0x41  = 0100 0001 
 checksum <-- checksum xor 0x42    = 0100 0001 xor 0100 0010 = 0000 0011
 checksum <-- checksum xor 0x43    = 0000 0011 xor 0100 0011 = 0100 0000
 checksum <-- checksum xor 0x44    = 0100 0000 xor 0100 0100 = 0000 0100
 checksum <-- checksum xor 0x45    = 0000 0100 xor 0100 0101 = 0100 0001

The checksum of the 5 bytes is 0100 0001, or 0x41, or 65. The program will print 65 as the checksum for the string ABCDE.
  • Examples
cs231a@aurora ~ $ ./hw5d 
> hello there
44
cs231a@aurora ~ $ ./hw5d 
> ABCDE
65
cs231a@aurora ~ $ ./hw5d 
> AA
0
cs231a@aurora ~ $ ./hw5d 
> Hello!
99
cs231a@aurora ~ $ ./hw5d 
> I like milk chocolate better than dark chocolate.
80


Submission


Submit your program on Moodle, in the Homework 5, Problem 4 section.

<showafterdate after="20171107 00:00" before="20171231">

Solutions


Problem 1


;;; ; hw5a.asm
;;; ; D. Thiebaut
;;; ;
;;; ; 
;;; ; -------------------------------------------------------------------

;;;  ------------------------------------------------------------
;;;  data areas
;;;  ------------------------------------------------------------

	        section .data
prompt		db	"> "
bufferAddr	dd	0
noChars		dd	0	
saveEcx		dd	0
	
;;;  ------------------------------------------------------------
;;;  code area
;;;  ------------------------------------------------------------

	        section .text
	        global  _start
		extern	_getString
		extern	_printString
		extern	_println
	
_start:
		mov	ecx, prompt
		mov	edx, 2
		call	_printString

		call	_getString
		mov	dword[noChars], edx
		mov	dword[bufferAddr], ecx

;;; print string in a loop that goes the same # of times
;;; as the number of chars in the string.

		mov	ecx, dword[noChars]
for:		mov	dword[saveEcx], ecx

		mov	ecx, dword[bufferAddr]
		mov	edx, dword[noChars]
		call	_printString
		call	_println

		mov	ecx, dword[saveEcx]
		loop	for

;;;  exit()

	        mov     eax,1
	        mov     ebx,0
	        int     0x80	; final system call


Problem 2


;;; ; hw5b.asm
;;; ; D. Thiebaut
;;; ;
;;;  ------------------------------------------------------------
;;;  data areas
;;;  ------------------------------------------------------------

	        section .data
prompt		db	"> "
bufferAddr	dd	0
noChars		dd	0	
saveEcx		dd	0
	
;;;  ------------------------------------------------------------
;;;  code area
;;;  ------------------------------------------------------------

	        section .text
	        global  _start
		extern	_getString
		extern	_printString
		extern	_println
	
_start:
		mov	ecx, prompt
		mov	edx, 2
		call	_printString

		call	_getString
		mov	dword[noChars], edx
		mov	dword[bufferAddr], ecx

;;; print string in a loop that goes the same # of times
;;; as the number of chars in the string.

		mov	ecx, dword[noChars]
	
for:		mov	edx, ecx
		mov	dword[saveEcx], ecx

		mov	ecx, dword[bufferAddr]
		call	_printString
		call	_println

		mov	ecx, dword[saveEcx]
		loop	for

;;;  exit()

	        mov     eax,1
	        mov     ebx,0
	        int     0x80	; final system call


Problem 3


;;; ; hw5c.asm
;;; ; D. Thiebaut
;;; ;
;;; ; -------------------------------------------------------------------

;;;  ------------------------------------------------------------
;;;  data areas
;;;  ------------------------------------------------------------

	        section .data
prompt		db	"> "
bufferAddr	dd	0
noChars		dd	0	
saveEcx		dd	0
	
;;;  ------------------------------------------------------------
;;;  code area
;;;  ------------------------------------------------------------

	        section .text
	        global  _start
		extern	_getString
		extern	_printString
		extern	_println
	
_start:
		mov	ecx, prompt
		mov	edx, 2
		call	_printString

		call	_getString
		mov	dword[noChars], edx
		mov	dword[bufferAddr], ecx

;;; print string in a loop that goes the same # of times
;;; as the number of chars in the string.

		mov	ecx, dword[noChars]
	
for:		mov	edx, ecx
		neg	edx
		add	edx, dword[noChars]
		inc	edx
	
		mov	dword[saveEcx], ecx

		mov	ecx, dword[bufferAddr]
		call	_printString
		call	_println

		mov	ecx, dword[saveEcx]
		loop	for

;;;  exit()

	        mov     eax,1
	        mov     ebx,0
	        int     0x80	; final system call


Problem 4


;;; ; hw5d.asm
;;; ; D. Thiebaut
;;; ;
;;; ; -------------------------------------------------------------------

;;;  ------------------------------------------------------------
;;;  data areas
;;;  ------------------------------------------------------------

	        section .data
prompt		db	"> "
bufferAddr	dd	0
noChars		dd	0	
checksum	db	0
	
;;;  ------------------------------------------------------------
;;;  code area
;;;  ------------------------------------------------------------

	        section .text
	        global  _start
		extern	_getString
		extern  _printInt
		extern	_println
		extern	_printString
	
_start:
		mov	ecx, prompt
		mov	edx, 2
		call	_printString

		call	_getString
		mov	dword[noChars], edx
		mov	dword[bufferAddr], ecx


;;; Get ready to scan the string and xor each char with al,
;;; which we use as a checksum

		mov	ecx, dword[noChars]
		mov	edx, dword[bufferAddr]
		mov	eax, 0

;;; loop through the string
for:		xor	al, byte[edx]
		inc	edx
		loop	for

;;; display the checksum in decimal
		call	_printInt
		call	_println
;;;  exit()

	        mov     eax,1
	        mov     ebx,0
	        int     0x80	; final system call


</showafterdate>