CSC270 Exercises on FSM

--D. Thiebaut 15:24, 28 February 2011 (EST)

---

Exercise #1

• Implement a sequencer (FSM) which activates 3 Lights: a green light, a yellow light, and a red light. The behavior of the FSM is the following:
  • the green light stays on for 30 seconds, then
  • the yellow light comes on and stays on for 30 seconds, then
  • the red light comes on and stays on for 30 seconds, then we repeat the pattern.
• There is only one light on at a given time.

Exercise #2

• Same as Exercise 1, but this time the behavior is the following
  • the green light comes on after the red light and stays on for 30 seconds,
  • the yellow light comes on and stays on for the next for 15 seconds,
  • the red light comes on after the yellow light for 30 seconds.

Exercise #3

• Create a "true" frequency divider that divides by 4.

Exercise #4

• What is the state diagram of the 3-flip-flop circuit with the following equations:

     D0 = Q0'
     D1 = Q0 XOR Q1
     D2 = Q1 XOR Q2

1. implements a simple sequencer

def main():

   # assume we start in a state where all 3 flip-flops are outputing 0
   D0 = 0
   D1 = 0
   D2 = 0

   for t in range( 20 ):
       Q0 = D0
       Q1 = D1
       Q2 = D2

       if t==0:
           print "%2s   %2s %2s %2s" % ( "t", "Q0", "Q1", "Q2" )
           print "----|------------"

       print "%2d  %2d %2d %2d" % ( t, Q0, Q1, Q2 )
       
       D0 = 1 - Q0
       D1 = Q0 ^ Q1
       D2 = Q1 ^ Q2
       

main()

Exercise #5

• Same question, but solve it with Python.