CSC212 Lab 8 2014

--D. Thiebaut (talk) 15:07, 15 October 2014 (EDT)

---

This lab is about programming shell scripts, using redirection, pipes, for-loops and various shell tools.

Connect to Linux

• For this lab, we won't use Eclipse. We'll use the Terminal instead.
• Connect to your 212a account on one of the Linux Mint machines, or, using your laptop, directly to beowulf2. If beowulf2 is unresponsive, you can connect from your laptop to any of these IP addresses, which belong to our Linux Mint machines in FH342 and FH345. In this case you should replace beowulf2.csc.smith.edu by a group of 4 numbers separated by dots. Note that this machine must be ON and have Linux booted and running before you can actually connect to it. You can connect to amachine even if somebody else is using it, or is already connected to it.

This section is only visible to computers located at Smith College

Redirection

• Every command, every program in the Linux operating system reads data from the standard-input, and outputs information to the standard-output and the standard-error. By default the standard-input, or sdin for short, is attached to the keyboard.

By default, the standard-output (stdout for short) and the standard-error (stderr for short) are connected to the display.

• Here is a short Java program that outputs to both stdout and stderr:

public class Demo1 {
	public static void main(String[] args) {
		System.out.println( "This goes to stdout" );
		System.err.println( "This goes to stderr" );
	}
}

Note the different streams used to pring: System.out and System.err.

• Run the program in the Terminal.
• Note the output, two very similar lines.

Redirecting stdout to a file.

• Let's run the program, but using the redirection symbol > to send stdout to a file:

java Demo1  >  Demo1.output

• Notice that the program still outputs one line on the screen. But only 1. To see the other line,

cat the file Demo1.output.

cat Demo1.output

You will see that the second line, the one directed to stdout has been captured in the file.

The purpose of stderr, is for program to send error messages to the terminal, and to have these messages displayed on the terminal, even when the output has been redirected to a file. We use output to stderr typically for error messages.

Redirecting outputs to an already-existing file

• Try the command date, which is a typical Linux command:

date

• Now capture the output of date to a file:

date  > Demo1.output
cat Demo1.output

You will have noticed that the redirection didn't work. You cannot redirect the output of a command to a file that already exists. If you want to force the redirection, add an ! after the >:

date >! Demo1.output
cat Demo1.output

Redirecting the output of several commands to the same file

• What if we wanted to store both the date and the output of Demo1 to Demo1.output? In this case we do not want the second output to erase the file. Linux uses >> to indicate redirection/append-to-end-of file.
• Let's try it:

date >! Demo1.output
java Demo1  >> Demo1.output

• Verify (using cat) that Demo1.output now contains a time tag, and the output of java Demo1.

GREP

• Grep is one of the most used and useful Linux commands. It is also very very fast. Its purpose is to find a string of characters in one or several files.
• Let's try it and see if our file Demo1.java contains the word main:

 grep main Demo1.java

• or the word Demo2:

grep Demo2 Demo1.java

• You notice that it is not very sophisticated. It just outputs the line that contains the string we're looking for, or nothing.
• Let's give it something more interesting to do. For this, get a copy of the file ulysses.txt in my 212a account:

getcopy ulysses.txt

(getcopy is not a Linux command, just a command we created in the department for students to get files from their instructor's account. Getcopy for you will copy file from my 212a account to your 212a-xx directory.)

• Use grep to see if ulysses.txt contains the word orange:

grep orange ulysses.txt

You should get a list of sentences taken from the 1.5 million character book, all containing "orange". Notice how fast grep searches the whole book!

• How about Orange (with an uppercase O)?

grep Orange ulysses.txt

• If we had wanted to get all the lines containing either orange or Orange, we could have said:

grep -i orange ulysses.txt

here "-i" means "independent of case" (upper- or lower-case).

Reverse Grep

• Grep can also report lines not containing a pattern. For example, if we wanted all the lines in Demo1.java not containing the word "print", we would write:

grep -v print Demo1.java

Counting Lines

• You can use wc, for word-count, to count characters, words, and lines in a file.
• Let's try it on Ulysses:

wc ulysses.txt

You will notice that Ulysses contains 32,663 lines, 264,965 words, and 1,520,798 characters.

• If all you are interested in are lines, you can specify -l (minus ell) on the command line:

wc -l ulysses.txt

Challenge 1

How many lines in Ulysses contain the word "orange" or "Orange"?
Think about a solution using all the Linux commands and tools seen so far...
Think some more and try it...
If you have no idea, then highlight the white area below to get some hints...

You can grep for "orange" using the -i option, and redirect the output to a file, say orange.txt.
Then you can use wc -l to find the number of lines in orange.txt.

Pipes

• The solution for the challenge above was this:

grep -i orange  ulysses.txt  > orange.txt
wc -l orange.txt

The first line redirects the output of grep into a file called orange.txt and the second line counts all the lines in orange.txt.

• There's another option that is more efficient, though. The option is to pipe the output of grep to the input of wc. In other words, we can send the standard-out of grep, and make it become the standard-in of wc. In linux this is done with the | symbol (vertical bar):

grep -i orange  ulysses.txt | wc -l

• Try it, and verify that you get the same result as before.

A More Interesting Example

• We are going to be doing a bit of computer forensic work. This should be done on beowulf2, though, as it has a longer log of the login information for its users.
• On beowulf2, at the prompt, type the command last:

last

This will list the last connection times for the users who have used beowulf2 since it was last rebooted.

• Try to use all the tools we have seen so far (and new ones) to answer the following questions (Hints are hidden in white spaces under the questions):

Challenge 2

How many times have user connected to beowulf2 since its last reboot?

Challenge 3

How many times did 212a-xx users connected to the server? How many times 231a-xx users? Try to have an output of only 1 line where the answer resides.

Challenge 4

Who are the users who are not 231a-xx or 212a-xx who have used beowulf2? You may have several lines of outputs with user names included in each line.

Challenge 5

Linux also supports the commands tail and head to list the last lines or first lines of a file, respectively. For example, to list the first 10 lines of the file ulysses.txt, one would type:

head -10 ulysses.txt

To get the last 20 lines:

tail -20 ulysses.txt

If you want to use pipes, you could execute these two commands as follows:

cat ulysses.txt | head -10
cat ulysses.txt | tail -20

Question 1

Strong with this knowledge, pipe together some Linux commands to see the very first time User thiebaut connected to beowulf2 (only 1 line should be output), and the last time the same user connected to beowulf2.

Question 2

Use pipes and redirection, and possibly several commands to create a file containing the two lines you printed above.