Difference between revisions of "CSC270 Lab 3 2016"

From dftwiki3
Jump to: navigation, search
(Measuring Voltages with the Agilent 34401A Voltmeter)
(Part 1: Ohm's Law)
Line 14: Line 14:
 
* You may not be able to find a 4 KOhm resistor, but most likely a 3.9 KOhm one.  (See chart below, taken from [http://ecee.colorado.edu/~mcclurel/resistorsandcaps.pdf ecee.colorado.edu/~mcclurel].
 
* You may not be able to find a 4 KOhm resistor, but most likely a 3.9 KOhm one.  (See chart below, taken from [http://ecee.colorado.edu/~mcclurel/resistorsandcaps.pdf ecee.colorado.edu/~mcclurel].
 
<br />
 
<br />
[[Image:ResistorChartByValue.png|600px|center]]
+
[[Image:ResistorChartByValue.png|400px|center]]
 
<br />
 
<br />
 
===Measuring Voltages with the Agilent 34401A Voltmeter===
 
===Measuring Voltages with the Agilent 34401A Voltmeter===

Revision as of 15:54, 9 February 2016

--D. Thiebaut (talk) 14:43, 9 February 2016 (EST)


Electronics, Diodes, and Transistors


Part 1: Ohm's Law


  • For this part, you will implement the circuit below on the breadboard and you will measure V1 and V2 (see more information about the voltmeter below). Verify that V1 + V2 = 5 V and that V1/R1 = V2/R2.


CSC270ResistorsSeries.png


  • You may not be able to find a 4 KOhm resistor, but most likely a 3.9 KOhm one. (See chart below, taken from ecee.colorado.edu/~mcclurel.


ResistorChartByValue.png


Measuring Voltages with the Agilent 34401A Voltmeter


AgilentVoltmeter.png