Difference between revisions of "CSC231 Homework 5 Fall 2017"

From dftwiki3
Jump to: navigation, search
(Problem 4)
(Your Assignment, Part 1)
Line 289: Line 289:
 
* Copy hw5dprep.asm to '''hw5d.asm'''.  This will be the program you submit to Moodle.
 
* Copy hw5dprep.asm to '''hw5d.asm'''.  This will be the program you submit to Moodle.
 
* Modify hw5d.asm so that it prompts the user for the name of the file,  gets the name of the file with _getString, and stores the string in the '''fileName''' variable.  You may want to make the fileName array of bytes large enough to work for very long file paths.  (100 characters should be sufficient).
 
* Modify hw5d.asm so that it prompts the user for the name of the file,  gets the name of the file with _getString, and stores the string in the '''fileName''' variable.  You may want to make the fileName array of bytes large enough to work for very long file paths.  (100 characters should be sufficient).
 +
* Make the program put a byte containing 0x00 at the end of the file name.  This is a requirement for strings used by Linux.  Linux is written in '''C''', and in C all strings end with a byte containing 0x00, or 0, or '\0'.  So, if we want to give the name of our file for Linux to open, we need to put a byte containing 0 as then end of the file name. 
 +
* Verify that your modified program works fine with different short text files that contain different text.
 +
<br />
 +
==Your Assignment, Part 2==
 +
<br />
 +
* Assume that the files we'll be processing with your program will always contain DNA strings, containing only 'A', 'C', 'G', 'T', and 'N', always in uppercase.  Modify your program so that it converts the DNA string to lowercase before printing it.
 +
* Submit your solution to Moodle.
 +
<br />
 +
==Examples==
 +
<br />
 +
* I have three text files containing 3 different DNA strings
  
 
=Problem 5=
 
=Problem 5=

Revision as of 15:29, 30 October 2017

--D. Thiebaut (talk) 09:27, 30 October 2017 (EDT)



This assignment is due Monday 11/6/2017 at 11:55 p.m.



Preparation


For this assignment you will need to downloaded an updated version of 231Lib.asm, which has been augmented with a new function for reading strings.

getcopy 231Lib.asm

An example program using the new function, _getString(), is shown below:

;;; ; hw5Prep.asm
;;; ; D. Thiebaut
;;; ;
;;; ; Gets a string from the user and prints it back
;;; ;
;;; ; to assemble and run:
;;; ;
;;; ;     nasm -f elf  hw5Prep.asm
;;; ;     nasm -f elf  231Lib.asm
;;; ;     ld -melf_i386 -o hw5Prep hw5Prep.o 231Lib.o
;;; ;     ./hw5Prep
;;; ; -------------------------------------------------------------------

;;;  ------------------------------------------------------------
;;;  data areas
;;;  ------------------------------------------------------------

	        section .data
prompt		db	"> "

	
;;;  ------------------------------------------------------------
;;;  code area
;;;  ------------------------------------------------------------

	        section .text
	        global  _start
		extern	_getString
		extern	_printString
		extern	_println
	
_start:
                ;; prompt the user 
		mov	ecx, prompt
		mov	edx, 2
		call	_printString

                ;; get a string from the user
                ;; _getString returns the address of the string read in ecx,
                ;; and the number of chars read in edx
		call	_getString

                ;; since ecx and edx already contain the address and number
                ;; of chars, we can directly call _printString, which needs
                ;; the string and number of chars in the same registers
		call	_printString

                ;; print a line-feed char.
		call	_println


;;;  exit()

	        mov     eax,1
	        mov     ebx,0
	        int     0x80	; final system call


Create a version of this program in your account, and play with it. Verify that it gets a string from you and prints it back.

Notes


  1. _getString saves the string in an array declared inside 231Lib.asm. This array contains at most 1000 bytes.
  2. when _getString returns to your main program, it will set ecx to the address of the array containing the string, and it will set edx to contain the number of characters the user typed at the keyboard.
  3. the user indicates the end of the string by pressing the ENTER key. The string does not contain the ENTER character (line-feed).
  4. although I didn't do that here because the program is so simple and short, it is a good idea, just after returning from a call to _getString, to save ecx and edx into two different variables in memory that will hold the address of the string and the number of chars entered at the keyboard.


Problem 1


Write a program called hw5a.asm that prompts the user for a string, and prints it back several times. The number of times the string is printed is the same as the number of characters in the string.

Examples
cs231a@aurora ~ $ ./hw5a
> B
B
cs231a@aurora ~ $ ./hw5a
> a
a
cs231a@aurora ~ $ ./hw5a
> hello
hello
hello
hello
hello
hello
cs231a@aurora  $ ./hw5a
> chocolate
chocolate
chocolate
chocolate
chocolate
chocolate
chocolate
chocolate
chocolate
chocolate
cs231a@aurora  $ ./hw5a
> Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
Hall o ween
 


Note


  • Your program does not have to handle 0-length strings. In other words, your program will not be tested with empty strings.


Submission


  • Submit your program in the Homework 5, Problem 1 section on Moodle.


Problem 2


Modify your solution program for Problem 1 so that it removes the last character of the previous printed string as it goes through the loop:

Examples
cs231a@aurora  $ ./hw5b
> Hall-o-ween
Hall-o-ween
Hall-o-wee
Hall-o-we
Hall-o-w
Hall-o-
Hall-o
Hall-
Hall
Hal
Ha
H
cs231a@aurora  $ ./hw5b
> a
a
cs231a@aurora ~/HWs/HW5/PB2 $ ./hw5b
> 123456789
123456789
12345678
1234567
123456
12345
1234
123
12
1


Submission


  • Submit your program in the Homework 5, Problem 2 section on Moodle.


Problem 3


Same as with Problem 2, but this time the triangle is reversed:

Example
cs231a@aurora  $ ./hw5c
> Hal-lo-we-en
H
Ha
Hal
Hal-
Hal-l
Hal-lo
Hal-lo-
Hal-lo-w
Hal-lo-we
Hal-lo-we-
Hal-lo-we-e
Hal-lo-we-en


Submission


  • Submit your program to the Homework 5, Problem 3 section on Moodle.


Problem 4


Create a new program in your account, called hw5dprep.asm, and store the code below in it.

;;; ; hw5d_prep.asm
;;; ; D. Thiebaut
;;; ;
;;; ;     nasm -f elf -F  stabs hw5d_prep.asm
;;; ;     ld -melf_i386 -o hw5d_prep 231Lib.o hw5d_prep.o
;;; ;     ./hw5d_prep
;;; ; -------------------------------------------------------------------

;;;  ------------------------------------------------------------
;;;  data areas
;;;  ------------------------------------------------------------

	        section .data
fileName	db	"dummy.txt", 0
buffer		db	"                                                          "
		db      "                                                          "
		db      "                                                          "
		db      "                                                          "
		db      "                                                          "
		db      "                                                          "
		db      "                                                          "
		db      "                                                          "

noCharsRead	dd	0
	
;;;  ------------------------------------------------------------
;;;  code area
;;;  ------------------------------------------------------------

	        section .text
	        global  _start
	
extern	_printString
extern	_readFile
extern	_println
	
_start:
		mov	eax, fileName 			; pass address of file-name in eax
		mov	ebx, buffer			; pass buffer address in ebx
		mov	ecx, noCharsRead		; pass address of var that will contain
							; number of chars read in ecx
	
		call	_readFile 			; read the file whose name was passed in
							; eax.  _readFile will read the file and
							; put all the bytes read into the buffer 	 
							; it will also put the number of bytes read
							; into the variable noCharsRead.

	;; print the contents of the buffer
		mov	ecx, buffer
		mov	edx, dword[noCharsRead]
		call	_printString
		call	_println
	
;;;  exit()

	        mov     eax,1
	        mov     ebx,0
	        int     0x80	; final system call


  • Read the code of your program carefully. Notice that it uses a new function, called _readFile. This function needs to be given 3 things in order to do its work. It needs to have a string containing the name of a file. This is given to the function in eax (and always eax). It also needs the address of a buffer were we want to receive the contents of the text file. The address of the buffer is given in ebx. Finally, the function needs to know the address of the variable declared in our program that will contain the number of bytes put in the buffer. The address of this variable is passed in edx.
  • To test your program you need to first create a text file called dummy.txt with emacs, and enter two or three lines of text in it. Maybe the first three lines of your favorite poem.
  • Assemble and link the hw5dprep.asm with the 231Lib library (make sure you getcopy the new version of the 231Lib.asm library, and that you assemble the new library again).
  • Run the hw5dprep executable, and verify that it prints the contents of the dummy.txt file.


Your Assignment, Part 1


  • Copy hw5dprep.asm to hw5d.asm. This will be the program you submit to Moodle.
  • Modify hw5d.asm so that it prompts the user for the name of the file, gets the name of the file with _getString, and stores the string in the fileName variable. You may want to make the fileName array of bytes large enough to work for very long file paths. (100 characters should be sufficient).
  • Make the program put a byte containing 0x00 at the end of the file name. This is a requirement for strings used by Linux. Linux is written in C, and in C all strings end with a byte containing 0x00, or 0, or '\0'. So, if we want to give the name of our file for Linux to open, we need to put a byte containing 0 as then end of the file name.
  • Verify that your modified program works fine with different short text files that contain different text.


Your Assignment, Part 2


  • Assume that the files we'll be processing with your program will always contain DNA strings, containing only 'A', 'C', 'G', 'T', and 'N', always in uppercase. Modify your program so that it converts the DNA string to lowercase before printing it.
  • Submit your solution to Moodle.


Examples


  • I have three text files containing 3 different DNA strings

Problem 5


Stay tuned!