CSC231 Lab 6 2010

--D. Thiebaut 13:51, 25 October 2010 (UTC)

---

This lab covers sound files in the WAV format, and performing various operations on a sound file using array operations.

The Format of Sound Files

• The document https://ccrma.stanford.edu/courses/422/projects/WaveFormat/ covers the WAV format pretty well, and can be a source of additional information

Part 1

Get the code

• Get a copy of the required files
  • readWaveFileSkel.asm
  • wav.inc

or simply get them with getcopy

 getcopy readWaveFileSkel.asm
 getcopy wav.inc

Get sound files

• Get the sample wav files hello.wav and goodbye.wav as well:

 getcopy hello.wav
 getcopy goodbye.wav

(there's more at http://buggerluggs.tripod.com/ie/wav-dir184.htm )

Play the sound

• Play the files with aplay to make sure you can hear them:

aplay goodbye.wav
Playing WAVE 'goodbye.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono

• Important: make a note of the size of the samples, in this case 8 bits, unsigned.

Assemble, Link and Run

• Do not modify readWavFileSkel.asm yet. On its own it will create a new copy of the goodbye.wav under the name goodbye2.wav.

• Assemble and link the file

nasm  -f elf readWavFileSkel.asm
ld -o readWavFileSkel readWavFileSkel.o
rm goodbye2.wav
./readWavFileSkel

• Check that you now have a new file in your directory called goodbye2.wav

• Play it.

 aplay goodbye2.wav

(Note: on a mac, you can use afplay from the command line instead of aplay.)

You should hear the same thing as you did when listening to the goodbye.wav file.

Part 2

Test #1: Increase intensity, the simple way

• Make a copy of readWavFileSkel.asm and call it readWavFile1.asm

• Modify it so that you multiply the intensity of the sound by 2.

• Listen to the result. Can you understand the message?

Test #2: Increase intensity, the more sophisticated way

• You will have figured out that the previous method gives poor results. Instead try to figure out how we can mulitply an 8-bit sample by 2 in such a way that if the result is less than 255, we keep it as is, but if it is larger than 255, we force the sample to 255. In other words, figure out a way to implement this algorithm with the instructions you know:

     sample = buffer[ i ];
     sample = sample * 2;
     if sample > 255:
        sample = 255

• implement your solution in you readWavFile1.asm file, assemble, link, and listen to the result... Any better?

Test #2: Decrease Intensity

• Same thing, but this time you will divide the intensity by 2. A good way to divide by two is to shift the binary pattern to the right. For example, to shift right the contents of eax by one bit, do this:

         shr      eax, 1

Test #3: Twice the Sound

• Double up the size of the wav file, making it repeat the sound "goodbye" twice, so that you will hear "goodbye, goodbye".