Difference between revisions of "CSC270 Lab 6 2012"
| Line 7: | Line 7: | ||
<br /> | <br /> | ||
| − | # | + | # Get together as a class and study the setup illustrated in the figure above. |
| − | # Come up with a design that will allow you to make a bit shift from one kit to the other, in a synchronized fashion. | + | # Come up with a design and a series of steps that will allow you to make a bit shift from one kit to the other, in a synchronized fashion. |
# Figure out how to make the bit start either on Kit #1 or on Kit #2. | # Figure out how to make the bit start either on Kit #1 or on Kit #2. | ||
| − | # Draw a solution design on the board as a group (everybody must participate) | + | # Draw a solution design on the board as a group (everybody must participate). |
| − | # Wire it up | + | # Wire it up. |
# Test it with the team across the bench. | # Test it with the team across the bench. | ||
# make sure the bit can shift around at 1Hz for at least 5 minutes without getting lost... | # make sure the bit can shift around at 1Hz for at least 5 minutes without getting lost... | ||
Revision as of 16:48, 6 March 2012
--D. Thiebaut 16:45, 6 March 2012 (EST)
Shifting bit
- Get together as a class and study the setup illustrated in the figure above.
- Come up with a design and a series of steps that will allow you to make a bit shift from one kit to the other, in a synchronized fashion.
- Figure out how to make the bit start either on Kit #1 or on Kit #2.
- Draw a solution design on the board as a group (everybody must participate).
- Wire it up.
- Test it with the team across the bench.
- make sure the bit can shift around at 1Hz for at least 5 minutes without getting lost...
