CSC111 Homework 6 2011
--D. Thiebaut 13:21, 25 October 2011 (EDT)
| This homework assignment is due on Nov. 1st, in the evening, at midnight. You can work on Problem #1 and on Problem #2 in pairs. You can submit both programs using rsubmit on beowulf, or by using the submit form at http://cs.smith.edu/~111a/submit6.htm |
Problem #1
Demo Program
- Create the following graphics program, either on beowulf, or on your own computer. Make sure the graphics.py library is in the same folder as your program.
# hw6a.py
# D. Thiebaut
# This program shows two balls moving in the graphics window.
# One is yellow, one is magenta. The magenta ball is not bound
# by the dimensions of the window, while the yellow one is and
# bounces off the edges as it moves.
# The initial location and speed of the balls are random, but such
# that the balls appear in the window, and are visible. It is possible
# for a ball to have a speed of 0, in which case it does not move.
from graphics import *
import random
def main():
"""Opens a graphics window 600x300 and draws two circles on it"""
W = 600
H = 300
win = GraphWin( "Two Moving Balls", W, H )
# draw a yellow ball, at a random place, with a random velocity
c1 = Circle( Point( random.randrange( 100, W-100 ), # random X
random.randrange( 100, H-100 ) ),# random Y
random.randrange( 10, 20 ) ) # random radius
c1.setFill( "yellow" )
dirX1 = random.randrange( -5, 5 ) # random horizontal displacement
dirY1 = random.randrange( -5, 5 ) # random vertical displacement
c1.draw( win )
# draw a magenta ball, at a random place, with a random velocity
c2 = Circle( Point( random.randrange( 100, W-100 ), # random X
random.randrange( 100, H-100 ) ),# random Y
random.randrange( 10, 20 ) ) # random radius
c2.setFill( "magenta" )
dirX2 = random.randrange( -5, 5 ) # random horizontal displacement
dirY2 = random.randrange( -5, 5 ) # random vertical displacement
c2.draw( win )
for i in range( 1000 ):
c1.move( dirX1, dirY1 )
c2.move( dirX2, dirY2 )
if c1.getCenter().getX() < 0 or c1.getCenter().getX() > W:
dirX1 = -dirX1
if c1.getCenter().getY() < 0 or c1.getCenter().getY() > H:
dirY1 = -dirY1
#--- wait for one more click and close up window---
Text( Point( W//2, H//2 ), "Click me to quit" ).draw( win )
win.getMouse()
win.close()
main()
Assignment
- Modify the program hw6a.py so that the two balls bounce off the walls of the window, not just one.
- Make the balls bounce when their side hits the walls, not their center.
- Make the two balls bounce off when they hit each other (the way pool-table balls would).
- There should be three black boxes in the graphics window, and if any one of the two balls happens to move completely inside any one of the boxes, it should stop there.
- the program should stop and display click me to quit when the simulation has gone through 1000 steps, or as soon as the two balls have been immobilized in boxes.
- there should be a fourth box, this one white, which should act as an obstacle. Any time a ball hits the white box, it should bounce off the walls of the box, in a same way it bounces off the walls.
Requirements
- Use a list to hold the black boxes (defined by their coordinates). For example, here is a way I could keep track of 3 boxes in a list called boxes:
# P1, P2, P3, P4, P5, and P6 are 6 points in the graphics window
boxes = []
r = Rectangle( P1, P2 )
boxes.append( r )
r = Rectangle( P3, P4 )
boxes.append( r )
r = Rectangle( P5, P6 )
boxes.append( r )
- You are free to select the size of the white and black boxes, but make them big enough to allow balls to hit them regularly, but not too big so as to make the balls "fall" in a black box before having time to hit a few walls or the white box.
- Include your account name(s) or your first name(s) in the title of the graphics window to make it easier to identify printed screen captures of your running program:
win = GraphWin( W, H, "111a-xx's billiard program" )
Realism
- It is not easy nor possible with our current knowledge of Python to make the balls bounce off each other in a realistic way. When a ball hits a wall, the rule is very nice and clear: we change the sign of either dirX or dirY, depending on which is perpendicular to the wall. When the balls hit each other, both dirX and dirY would normally change. The real equation for how dirX and dirY change is too complicated for us. Invent your own laws of physics and implement them in python!
Submission
- Make sure the header of your program contains your names and account numbers, if working in pairs, or just your name and account number if working individually.
- Submit your program as follows:
rsubmit hw6 hw6a.py
Additional Information
- You may find the following function useful for computing the distance between two graphics points:
from math import * # this should be at the beginning of the program
def distance( P1, P2 ):
"""Computes the distance between Point P1 and Point P2. The returned value is a float"""
return sqrt( pow( P1.getX() - P2.getX(), 2 ) + pow( P1.getY() - P2.getY(), 2 ) )
- Here is a way it could be used:
P1 = Point( x1, y1 )
P2 = Point( x2, y2 )
...
if distance( P1, P2 ) > 30:
# do something if the points are more than 30 pixels away from each other
else
# do something else if the points are closer than 30 pixels
Problem #2
- This second program should be called hw6b.py, but before you start on it, though, play with the following program and figure out how it works. It will provide you with some good clues for how to code hw6b.py.
# people.py
# D. Thiebaut
# a demo program illustrating how to sort an array of pairs.
# a pair is a list with 2 items. Here each pair contains a string, and
# an integer. The string is the name of a person, the integer that person's
# age.
def main():
people = [ ["Marie", 16], ["Joe", 33], ["Alex", 30], ["Fred", 5 ] ]
# sort the list by alphabetical order
people.sort()
# display the contents of the list in alphabetical order
for person, age in people:
print( "%30s: %4d" % ( person, age ) )
print()
# create a new list of people, this time the age is first in
# each pair.
newPeople = []
for person, age in people:
newPeople.append( [age, person] )
# sort by age, in increasing order
newPeople.sort()
# display the contents of the list, ordered by age
for age, person in newPeople:
print( "%-30s: %4d" % ( person, age ) )
# find the oldest person
age, person = max( newPeople )
print( "\nThe oldest person is", person," who's", age, "years old.\n\n" )
main()
- Now that you have played with people.py, try this new program, called hw6b.py:
# hw6b.py
# your name
#
statistics = [['Afghanistan', 28710000, -1, -1, 1], ['Albania', 3580000,
12000, -1, 10], ['Algeria', 32810000, 180000, -1, 2],
['Andorra', 69150, 24500, -1, 1], ['Angola', 10760000,
60000, -1, 1], ['Anguilla', 12738, 919, -1, 16],
['Antigua_and_Barbuda', 67897, 5000, -1, 16], ['Argentina',
38740000, 4650000, -1, 33], ['Armenia', 3320000, 30000, -1,
9], ['Aruba', 70844, 24000, -1, -1], ['Australia', 19730000,
13010000, 9020000, 571], ['Austria', 8180000, 4650000,
1300000, 37], ['Azerbaijan', 7830000, 25000, -1, 2],
['Bahrain', 667238, 140200, -1, 1], ['Bangladesh',
138440000, 150000, -1, 10], ['Barbados', 277264, 6000, -1,
19], ['Belarus', 10330000, 422000, -1, 23], ['Belgium',
10280000, 4870000, 1600000, 61], ['Belize', 266440, 18000,
-1, 2], ['Benin', 7040000, 25000, -1, 4], ['Bhutan',
2130000, 2500, -1, -1], ['Bolivia', 8580000, 78000, -1, 9],
['Bosnia_and_Herzegovian', 3980000, 45000, -1, 3],
['Botswana', 1570000, 33000, -1, 11], ['Brazil', 182030000,
22320000, 10860000, 50], ['Brunei', 358098, 35000, -1, 2],
['Bulgaria', 7530000, 1610000, -1, 200], ['Burkina_Faso',
13220000, 25000, -1, 1], ['Burma', 42510000, 10000, -1, 1],
['Burundi', 6090000, 6000, -1, 1], ['Cambodia', 13120000,
10000, -1, 2], ['Cameroon', 15740000, 45000, -1, 1],
['Canada', 32200000, 20450000, 8800000, 760], ['Cape_Verde',
412137, 12000, -1, 1], ['Cayman_Islands', 41934, -1, -1,
16], ['Central_African_Republic', 3680000, 2000, -1, 1],
['Chad', 9250000, 4000, -1, 1], ['Chile', 15660000, 5040000,
-1, 7], ['China', 1280000000, 99800000, -1, 3], ['Colombia',
41660000, 1870000, -1, 18], ['Comoros', 632948, 2500, -1,
1], ['Republic_of_the_Congo_Democratic', 56620000, 6000, -1,
1], ['Congo_Republic', 2950000, 500, -1, 1],
['Cook_Islands', 21008, -1, -1, 3], ['Costa_Rica', 3890000,
384000, -1, 3], ['Cote_d_Ivoire', 16960000, 70000, -1, 5],
['Croatia', 4420000, 480000, -1, 9], ['Cuba', 11260000,
120000, -1, 5], ['Cyprus', 771657, 150000, -1, 6],
['Czech_Republic', 10240000, 3530000, -1, 300], ['Denmark',
5380000, 3720000, -1, 13], ['Djibouti', 457130, 3300, -1,
1], ['Dominica', 69655, 2000, -1, 16],
['Dominican_Republic', 8710000, 186000, -1, 24],
['East_Timor', 977853, -1, -1, -1], ['Ecuador', 13710000,
328000, -1, 31], ['Egypt', 74710000, 2420000, -1, 50],
['El_Salvador', 6470000, 40000, -1, 4],
['Equatorial_Guinea', 510473, 900, -1, 1], ['Eritrea',
4360000, 10000, -1, 5], ['Estonia', 1400000, 620000, -1,
38], ['Ethiopia', 66550000, 20000, -1, 1], ['Faroe_Islands',
46345, 3000, -1, 2], ['Fiji', 856300, 15000, -1, 2],
['Finland', 5190000, 3270000, -1, 3], ['France', 60180000,
25470000, 15530000, 62], ['French_Guiana', 182917, 2000, -1,
2], ['French_Polynesia', 262125, 16000, -1, 2], ['Gabon',
1320000, 18000, -1, 1], ['Gambia', 1500000, 5000, -1, 2],
['Georgia', 4930000, 25000, -1, 6], ['Germany', 82390000,
41880000, 29520000, 200], ['Ghana', 20460000, 200000, -1,
12], ['Gilbraltar', 27776, -1, -1, 2], ['Greece', 10660000,
2710000, -1, 27], ['Greenland', 56385, 20000, -1, 1],
['Grenada', 89258, 5200, -1, 14], ['Guadeloupe', 440189,
4000, -1, 3], ['Guam', 163941, 5000, -1, 20], ['Guatemala',
13900000, 200000, -1, 5], ['Guernsey', 64818, -1, -1, -1],
['Guinea', 9030000, 15000, -1, 4], ['Guinea-Bissau',
1360000, 4000, -1, 2], ['Guyana', 702100, 95000, -1, 3],
['Haiti', 7520000, 30000, -1, 3], ['Honduras', 6660000,
40000, -1, 8], ['Hong_Kong', 7390000, 4580000, 2630000, 17],
['Hungary', 10040000, 2940000, -1, 16], ['Iceland', 200000,
198000, -1, 20], ['India', 1040000000, 36970000, -1, 43],
['Indonesia', 234890000, 12860000, -1, 24], ['Iran',
68270000, 420000, -1, 8], ['Iraq', 24680000, 12500, -1, 1],
['Ireland', 3920000, 1810000, -1, 22],
['Islas_Malvinas_(Falkland_Islands)', 2967, -1, -1, 2],
['Isle_of_Man', 74261, -1, -1, -1], ['Israel', 6110000,
3130000, 976000, 21], ['Italy', 57990000, 25530000,
15700000, 93], ['Jamaica', 2690000, 100000, -1, 21],
['Japan', 127210000, 78050000, 36580000, 73], ['Jersey',
90156, -1, -1, -1], ['Jordan', 5460000, 212000, -1, 5],
['Kazakhstan', 16760000, 100000, -1, 10], ['Kenya',
31630000, 500000, -1, 65], ['Kiribati', 98549, 1000, -1, 1],
['Kuwait', 2180000, 200000, -1, 3], ['Kyrgyzstan', 4890000,
51600, -1, -1], ['Laos', 5920000, 10000, -1, 1], ['Latvia',
2340000, 455000, -1, 41], ['Lebanon', 3720000, 300000, -1,
22], ['Lesotho', 1860000, 5000, -1, 1], ['Liberia', 3310000,
500, -1, 2], ['Libya', 5490000, 20000, -1, 1],
['Liechtenstein', 3314, -1, -1, -1], ['Lithuania', 3590000,
480000, -1, 32], ['Luxembourg', 454157, 100000, -1, 8],
['Macau', 469903, 101000, -1, 1], ['Macedonia', 2060000,
100000, -1, 6], ['Madagascar', 16970000, 35000, -1, 2],
['Malawi', 11650000, 35000, -1, 7], ['Malaysia', 23090000,
10040000, -1, 7], ['Maldives', 329684, 6000, -1, 1],
['Mali', 11620000, 30000, -1, 13], ['Malta', 400420, 59000,
-1, 6], ['Marshall_Islands', 56429, 900, -1, 1],
['Martinique', 425966, 5000, -1, 2], ['Mauritania', 2910000,
7500, -1, 5], ['Mauritius', 1210000, 158000, -1, 2],
['Mexico', 104900000, 13880000, -1, 51], ['Micronesia',
108143, 2000, -1, 1], ['Moldova', 4430000, 15000, -1, 2],
['Monaco', 32130, -1, -1, 2], ['Mongolia', 2710000, 40000,
-1, 5], ['Montserrat', 8995, -1, -1, 17], ['Morocco',
31680000, 400000, -1, 8], ['Mozambique', 17470000, 22500,
-1, 11], ['Namibia', 1920000, 45000, -1, 2], ['Nauru',
12570, -1, -1, 1], ['Nepal', 26460000, 60000, -1, 6],
['Netherlands_Antilles', 216226, 2000, -1, 6],
['New_Caledonia', 210798, 24000, -1, 1], ['New_Zealand',
3950000, 2340000, -1, 36], ['Nicaragua', 5120000, 20000, -1,
3], ['Niger', 10050000, 12000, -1, 1], ['Nigeria',
133880000, 100000, -1, 11], ['Niue', 2145, -1, -1, 1],
['Norfolk_Island', 1853, -1, -1, 2], ['North_Korea',
22460000, -1, -1, 1], ['Northern_Mariana_Islar', 80006, -1,
-1, 1], ['Norway', 4540000, 3030000, -1, 13], ['Oman',
2800000, 120000, -1, 1], ['Pakistan', 150690000, 1200000,
-1, 30], ['Palau', 19717, -1, -1, 1], ['Panama', 2960000,
45000, -1, 6], ['Papua_New_Guinea', 5290000, 135000, -1, 3],
['Paraguay', 6030000, 20000, -1, 4], ['Peru', 28400000,
4570000, -1, 10], ['Philippines', 84610000, 5960000, -1,
33], ['Pitcairn_Islands', 47, -1, -1, -1], ['Poland',
38620000, 10400000, -1, 19], ['Portugal', 10100000, 6090000,
-1, 16], ['Puerto_Rico', 3880000, 600000, -1, 76], ['Qatar',
817052, 75000, -1, 1], ['Reunion', 755171, 10000, -1, 1],
['Romania', 22270000, 4940000, -1, 38], ['Russia',
144520000, 21230000, -1, 35], ['Rwanda', 7810000, 20000, -1,
2], ['Samoa', 178173, 3000, -1, 2], ['San_Marino', 28119,
-1, -1, 2], ['Sao_Tome_and_Principe', 175883, 9000, -1, 2],
['Saudi_Arabia', 24290000, 2540000, -1, 42], ['Senegal',
10580000, 100000, -1, 1], ['Seychelles', 80469, 9000, -1,
1], ['Sierra_Leone', 5730000, 20000, -1, 1], ['Singapore',
4600000, 2750000, 956000, 9], ['Slovakia', 5430000, 1610000,
-1, 6], ['Slovenia', 1930000, 930000, -1, 11],
['Solomon_Islands', 509190, 8400, -1, 1], ['Somalia',
8020000, 200, -1, 3], ['South_Africa', 43600000, 4780000,
-1, 150], ['South_Korea', 42760000, 31670000, -1, 11],
['Spain', 40210000, 13440000, 8210000, 56], ['Sri_Lanka',
19740000, 121500, -1, 5], ['St._Kitts_and_Nevis', 38763,
2000, -1, 16], ['St._Lucia', 162157, 3000, -1, 15],
['St._Vincent_and_the_Grenadines', 116812, 3500, -1, 15],
['Sudan', 38110000, 56000, -1, 2], ['Suriname', 435449,
14500, -1, 2], ['Svalbard', 2811, -1, -1, -1], ['Swaziland',
1160000, 14000, -1, 6], ['Sweden', 8870000, 6120000,
4640000, 29], ['Switzerland', 7310000, 4600000, 3310000,
44], ['Syria', 17580000, 60000, -1, 1], ['Taiwan', 22600000,
9520000, 5000000, 8], ['Tajilistan', 6860000, 5000, -1, 4],
['Tanzania', 35920000, 300000, -1, 6], ['Thailand',
64260000, 7570000, -1, 15], ['The_Bahamas', 297477, 16900,
-1, 19], ['The_Netherlands', 16149999, 9790000, 7780000,
52], ['Togo', 5420000, 50000, -1, 3], ['Tokelau', 1418, -1,
-1, 1], ['Tonga', 108141, 1000, -1, 2],
['Trinidad_and_Tobago', 1100000, 120000, -1, 17],
['Tunisia', 9920000, 400000, -1, 1], ['Turkey', 68100000,
7270000, -1, 50], ['Turkmenistan', 4770000, 2000, -1, -1],
['Turks_and_Caicos', 19350, -1, -1, 14], ['Tuvalu', 11305,
-1, -1, 1], ['Uganda', 25630000, 60000, -1, 2], ['Ukraine',
48050000, 5278100, -1, 260], ['United_Arab_Emirates',
2480000, 900000, -1, 1], ['United_Kingdom', 60090000,
33110000, 22550000, 400], ['United_States', 290340000,
185550000, 139520000, 7000], ['Uruguay', 3410000, 600000,
-1, 14], ['Uzbekistan', 25980000, 100000, -1, 42],
['Vanuatu', 199414, 3000, -1, 1], ['Venezuela', 24650000,
2310000, -1, 16], ['Vietnam', 81620000, 400000, -1, 5],
['Virgin_Islands', 124778, 12000, -1, 50],
['Wallis_and_Futuna', 15734, -1, -1, 1], ['Western_Sahara',
261794, -1, -1, 1], ['Yemen', 19340000, 17000, -1, 1],
['Zambia', 10300000, 25000, -1, 5], ['Zimbabwe', 12570000,
100000, -1, 6]]
def prettyPrint( stats ):
print( "%-40s %10s %10s %10s %10s" % ( " ", " ", " ", "Active", " " ) )
print( "%-40s %10s %10s %10s %10s" % ( "Country", "Population", "Users", "Users", "ISPs" ) )
for item in stats:
country, population, internetUsers, activeUsers, ISPs = item
print( "%-40s %10d %10d %10d %10d" % ( country, population, internetUsers, activeUsers, ISPs ) )
def main():
prettyPrint( statistics )
main()
- Run the program, and observe its output:
Active
Country Population Users Users ISPs
Afghanistan 28710000 -1 -1 1
Albania 3580000 12000 -1 10
Algeria 32810000 180000 -1 2
Andorra 69150 24500 -1 1
Angola 10760000 60000 -1 1
...
- This data is taken from http://www.clickz.com/ and represents statistics about the world population of Internet users, and the number of Internet Service Providers dating from a few years back. (For a fun movie made very last year with interesting statistics about the Internet, go to http://mashable.com/2010/02/26/state-of-internet/ )
- The original data used "NA" to indicate when data was Not Available, but I have replaced the NAs with -1 to simplify processing.
- Study the program and make sure you understand how the data is coded, and how the program works. There are no new Python constructs in this code. We have seen all the Python constructs used in this program in class or in a lab before!
Your assignment
Your assignment is to add new functions to this program so that we get a finer quantitative view of the world in terms of its usage of the Internet.
- Question 1
- Add a new function that will receive the statistics list as parameter and that will print the top 10 countries in the world by order of their population. This function should be called from the main() function and should use the same format as the one shown above, i.e. with the country name listed first, then the population, then the Active users, then the users, then the ISPs, but it should output a ranking on the left side, with 1 listed in the left margin of the first country, 2 listed in the left margin of the second country, until the 10th country. Note that the number 10 has 2 digits, while 1 to 9 have only one digits. However, the countries names and the various quantities should be listed one above the other without a jump to the right on the 10th line.
- Make sure your program does not output the complete list of the 225 countries! This would use up too much paper when your program is graded. All that we are interested in this assignment is a collection of short lists of "the most" countries, for various quantities.
- Make sure your program prints a title before the list of the top 10 populated countries. Something like "Top 10 Countries ranked by population" is fine.
- Make sure you are efficient and that if you do not replicate identical code in different functions. The purpose of a function is to encapsulate code that can be used many times in different areas.
- Question 2
- Add a new function that will receive the statistics list as parameter and that will print the top 10 countries in terms of users and active users (i.e. add the number of users and the number of active users, and list the 10 countries with the largest such sums).
- As with Question 1, make sure you print at title before the liste.
- Question 3
- Add a new function that will receive the statistics list as a parameter and that will print the top 10 countries in terms of the ratio of active Internet Users to population. The first country listed should be the one with the highest percentage of active users to the total population.
- Use the same print format as explained in Question 2, including a title before the list.
- Question 4 -- Optional and Extra Credit
- Add a function to your program that will receive statistics as a parameter and that will print out some global statistics.
- The total world population as recorded in the list statistics
- The total number of Internet users (be careful not to count the -1 values.)
- The total number of active Internet users.
- The total number of ISPs.
- The percentage of active users relative to Internet users, for the whole world.
- The percentage of Internet users relative to the world population.
- The percentages should be printed with 2 decimal digits, and with the % sign. For example:
Active Internet users world-wide: 12.30%
- (Note, the % sign is a string operator. When it appears in a string, Python thinks it is going to be used as a substitution operator. To print a regular %-sign, just write two of them next to each other and Python will understand!)
A Note on Grading
- Each programs counts for 50% of the grade.
- Documentation is becoming more important with each assignment! Make sure you document your code well. Functions should have a header, the same way programs have headers. Python programmers like to use doc-strings as function headers. A doc-string is a """string""" that is inserted between the def part of the function, and the first python statement:
def f1( a, b, c ):
"""f1 receives 3 strings.
Splits the strings and ... blah-blah-blah...
"""
wordsa = a.split()
wordsb = b.split()
wordsc = c.split()
...
- You know how to test for different conditions. If you know something is going to make your program crash, make sure you have a test for it.
- If you know your program is not working properly for some quantities, or under certain conditions, explain this in your header.
- Do not make your program output erroneous information. Better no information rather than erroneous information!
