--D. Thiebaut (talk) 09:37, 3 September 2014 (EDT)

Part 1: Python Review

The problem below is taken from CSC111, Homework 10 given Spring 2014. Work out a solution in pair or individually. There is nothing to submit for this part.

Lost Cat

(image from nicepixy.net)

The program below is missing its class! And it is also missing its documentation! It used to contain a class defined, with methods and member variables, and a fully developed documentation, but unfortunately all of them got erased.

We do have the output of a run of the program, though, when it still had its class definition. Both the incomplete code and the output are shown below.

#
# missing class goes here...
#



def getNewCat():
    print( "\nPlease enter the information for the new cat:")
    name = input(       "Cat name?         " )
    age  = int( input(  "Age, in years?    " ) )
    vac  = input(       "Vaccinated (Y/N)? " ).strip().lower()
    vac  = vac in ['y', 'yes']
    neut = input(       "Neutered (Y/N)?   " ).strip().lower()
    neut = neut in ['y', 'yes' ]
    breed= input(       "Breed?            " ).strip()
    
    return Cat( name, age, vac, neut, breed )

def display( L, caption ):
    print( "\n\n"+caption )
    print( "=" * len( caption ) )
    for cat in L:
        print( cat )

def main():
    text="""Minou, 3, Yes, Yes, stray
            Max, 1, Yes, No, Burmese
            Gizmo, 2, No, No, Bengal
            Garfield, 4, Yes, Yes, Orange Tabby"""

    for line in text.split( "\n" ):
        words = line.strip().split( "," )
        if len( words ) != 5:
            continue
        name, age, vaccinated, neutered, breed = words
        age = int( age.strip() )
        if vaccinated.strip().lower() == "yes":
            vaccinated = True
        else:
            vaccinated = False

        neutered = neutered.strip().lower() == "yes"
        
        cat = Cat( name.strip(), age, vaccinated, neutered, breed.strip() )
        try:
            cats.append( cat )
        except NameError:
            cats = []
            cats.append( cat )

    display( cats, "List of cats:" )

    cats.append( getNewCat() )

    display( cats, "List of cats with new addition:" )

    vaccinatedNeuteredCats = []
    for cat in cats:
        if cat.isVaccinated() and cat.isNeutered():
            vaccinatedNeuteredCats.append( cat )

    display( vaccinatedNeuteredCats, "Vaccinated and neutered cats:" )
    
    
main()

Output

List of cats:
=============
Cat: Minou, age: 3, vaccinated, neutered (stray)
Cat: Max, age: 1, vaccinated, not neutered (Burmese)
Cat: Gizmo, age: 2, not vaccinated, not neutered (Bengal)
Cat: Garfield, age: 4, vaccinated, neutered (Orange Tabby)

Please enter the information for the new cat:
Cat name?         Ralph
Age, in years?    4
Vaccinated (Y/N)? y
Neutered (Y/N)?   y
Breed?            Angora


List of cats with new addition:
===============================
Cat: Minou, age: 3, vaccinated, neutered (stray)
Cat: Max, age: 1, vaccinated, not neutered (Burmese)
Cat: Gizmo, age: 2, not vaccinated, not neutered (Bengal)
Cat: Garfield, age: 4, vaccinated, neutered (Orange Tabby)
Cat: Ralph, age: 4, vaccinated, neutered (Angora)


Vaccinated and neutered cats:
=============================
Cat: Minou, age: 3, vaccinated, neutered (stray)
Cat: Garfield, age: 4, vaccinated, neutered (Orange Tabby)
Cat: Ralph, age: 4, vaccinated, neutered (Angora)

Question

Recreate the original Python program with its Cat class. Make sure that it will generate the same output shown above if fed the same cat information.

Solution

Solution (will be released later)

Part 2: Connection to a Remote Computer Server: Beowulf2

In this section you will learn how to connect to a remote computer and work on it using the shell, or Terminal. The server for the CS department is called beowulf2. Its address is beowulf2.csc.smith.edu.

Using a Shell or Terminal

There are 3 different ways for you to connect to our server:

From a Linux computer in FH342
From a Mac laptop
From a Windows laptop.

Whatever computer you have, it is good for a computer science to be familiar with more than one way to connect to remote computers. Try to use different methods during the semester.

For Windows PCs, Additional Software is Needed

If you're using a Windows PC, go to https://www.smith.edu/smithsoftware/index.html and download the SSH package after having read the installation instructions.

You should get a file called ssh.exe in your Download folder.
Double click on it and accept all the default answers to installation questions. You should end up with 2 new icons on your desktop:

Once installed, double click on the blue icon (ssh), and then on Quick Connect
Enter your login information from the CSC212 account sheet.
Click Yes
Enter your password
Et voilà!

You're ready to start working on Beowulf2!

For Mac Users: Use Terminal

Open a terminal window and type the following command at the prompt:

ssh 220a-xx@beowulf2.csc.smith.edu

replace xx by your 2-letter Id.
provide your new password when prompted
You should end up with a screen similar to this one:

For Users of our Linux Computers

If you are using one of the desktops in FH342, make sure it is NOT running Windows. If it is, restart the computer and pick the Linux Mint operating system.
At the prompt enter your new 212a-xx account and password.
Locate the Terminal application and open it up.
You should be ready to roll!

(online image taken from http://community.linuxmint.com/tutorial/view/244)

Connected to Beowulf2: Now what?

You only need a handful of commands to start with:
- ls (ell ess) to list files
- cp to copy files
- rm to remove files
- cat to display the contents of text files (and programs)

Let's try to play with some text files. I have prepared 3 text files for you to play with. You can get them from my 212a account by typing these commands at the prompt:

getcopy file1.txt
getcopy file2.txt
getcopy file3.txt

Now see if the files have ended up in your directory with the command ls (ell ess). Just type ls followed by the RETURN key.
To display the contents of each one in the Terminal window, just cat them.

cat file1.txt
cat file2.txt
cat file3.txt

and you can also cat them all at once:

cat file1.txt file2.txt file3.txt

Remove file3.txt with rm:

rm file3.txt

and check with ls that the file is gone.
make a copy of file1.txt and name the copy file4.txt:

cp file1.txt file4.txt
ls
cat file4.txt

remove all files that start with the string file:

rm file*

Note that it is always dangerous to remove files and use the star character! You could delete more files than you wanted! So be careful.

Documentation for Linux Commands

Linux Mint has a nice community of users who have created some good tutorials and reference pages. You may want to browse through this page of Terminal commands and try different commands at the Linux prompt.
You can also use the manual pages for Linux systems. All Linux systems have their internal manual where all the commands are documented. These manual pages are all that is needed for computer gurus to figure out how to use commands. However, they are often very cryptic and hard to decipher. Nonetheless, you should get used to them and look up commands and their variations when you forget how to use a particular command:

man ls                (will display the manual page for the ls command)
man cat               (will display the manual page for the cat command)
man -k remove         (will display all the pages that contain the keyword "remove".  rm should be there...)

Part 3: Playing with emacs

In order for you not to suffer from a misbehaving backspace/delete key as happened in class yesterday, you should execute the following command (your input is in bold face)

  [111c-xx@beowulf ~]$  getcopy .emacs
  cp: overwrite `./.emacs'? y

(That is "getcopy" space period "emacs") It's a configuration file that will allow emacs to understand the backspace key correctly. You only need to do this once and you will be set for the semester.

You will now get a copy of a file from your instructor's account, and edit it. The file is called Fulghum and is a short story from Robert Fulghum's book All I really need to know I learned in Kindergarten.

To get a copy of this file, type

  [111c-xx@beowulf ~]$  getcopy fulghum

followed by the return key. Then edit the file with the command

  [111c-xx@beowulf ~]$  emacs fulghum

Simply work on the first paragraph of the file, and try to straighten it up. I have indicated below, on the right-hand side, which emacs commands you can use to fix the text on your screen.

When you are done with the modification, or if you want to stop for right now and save your modifications, type C-x C-c, and press y when emacs asks if you want to save the file. Below is a summary of some useful emacs commands.

You should find some time this week to go to a lab and read the Emacs at Smith handout while in front of the terminal, on your own. This is the best way to test and learn the different features of the editor!

DEL/Shift Backspace	Delete previous character
c-d	Delete character at cursor
Esc-d	Delete word
c-k	Kill line
c-a	Go to beginning of line
c-e	Go to end of line
c-f	Move cursor 1 character forward
c-b	Move cursor 1 character backward
c-p	Move to previous line
c-n	Move to next line
c-x c-c	quit emacs and save file
c-x c-s	save file but remain in emacs
c-g	GE OUT OF TROUBLE!

Part I of the homework assignment for this week is to edit the complete story about Larry Walters and his flight over Los Angeles.

CSC212 Lab 1 2014

Contents

Part 1: Python Review

Lost Cat

Output

Solution

Part 2: Connection to a Remote Computer Server: Beowulf2

Using a Shell or Terminal

For Windows PCs, Additional Software is Needed

For Mac Users: Use Terminal

For Users of our Linux Computers

Connected to Beowulf2: Now what?

Documentation for Linux Commands

Part 3: Playing with emacs

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools