CSC270 Lab 6 2012
--D. Thiebaut 16:45, 6 March 2012 (EST)
Shifting bit
- Regroup together and study the setup illustrated in the figure above.
- Come up with a design that will allow you to make a bit shift from one kit to the other, in a synchronized fashion.
- Figure out how to make the bit start either on Kit #1 or on Kit #2.
- Draw a solution design on the board as a group (everybody must participate)
- Wire it up
- Test it with the team across the bench.
- make sure the bit can shift around at 1Hz for at least 5 minutes without getting lost...