--D. Thiebaut 16:45, 6 March 2012 (EST)

Shifting bit

Get together as a class and study the setup illustrated in the figure above.
Come up with a design and a series of steps that will allow you to make a bit shift from one kit to the other, in a synchronized fashion.
Figure out how to make the bit start either on Kit #1 or on Kit #2.
Draw a solution design on the board as a group (everybody must participate).
Wire it up.
Test it with the team across the bench.
Make sure the bit can shift around at 1Hz for at least 5 minutes without getting lost...

Optional

Pick an Red-Yellow-Green FSM of your liking, and implement it with JK flip-flops (74LS76).
Warning: JK flip-flops are finicky and are known not to work properly often...