CSC270 Lab 3 2016

From dftwiki3
Revision as of 15:59, 9 February 2016 by Thiebaut (talk | contribs) (→‎Measuring Voltages with the Agilent 34401A Voltmeter)
Jump to: navigation, search

--D. Thiebaut (talk) 14:43, 9 February 2016 (EST)

Electronics, Diodes, and Transistors


Part 1: Ohm's Law


  • For this part, you will implement the circuit below on the breadboard and you will measure V1 and V2 (see more information about the voltmeter below). Verify that V1 + V2 = 5 V and that V1/R1 = V2/R2.


CSC270ResistorsSeries.png


  • You may not be able to find a 4 KOhm resistor, but most likely a 3.9 KOhm one. (See chart below, taken from ecee.colorado.edu/~mcclurel.


ResistorChartByValue.png


Measuring Voltages with the Agilent 34401A Voltmeter


AgilentVoltmeter.png


  • Press the DC V button, and plug a black probe (rubber banana plug) into the LO connector (refer to diagram above), and a red probe (rubber banana plug) into the HI connector.
  • Press the Auto/Man button to put the meter into Automatic range measurements.
Retrieved from "http://dominiquethiebaut.com/dftwiki3/index.php?title=CSC270_Lab_3_2016&oldid=28480"