Difference between revisions of "Tutorial: Printed-Circuit Boards"
(→An Example) |
(→TinyCAD) |
||
| Line 43: | Line 43: | ||
</center> | </center> | ||
<br /> | <br /> | ||
| − | + | * Open the '''Analog''' library, and pick the '''Resistor''', and drop it on the schematics pane where resistors are needed. Use the '''Tool Options''' window to set the orientation of the resistors to '''left'''. | |
<br /> | <br /> | ||
Revision as of 07:59, 23 June 2011
Page under construction!
--D. Thiebaut 12:37, 20 June 2011 (EDT)
Contents
Software
All are open-source.
- TinyCAD
- FreePCB
- ViewMate (get the free registration code via email to install)
- PCBExpress/Sunstone: Web site where to order PCB from.
Process
- First create schematics with TinyCAD
- Then route the lines on a 4-layer board with FreePCB
- Check the CAM files generated by FreePCB with ViewMate
- Once the output files are ready, upload them to PCBExpress (accept 4-layers+mask option).
An Example
- We'll create a PCB for the following simple circuit taken from seekic.com:
TinyCAD
- Open TinyCAD
- Open the 74TTL library in the left pane
- Pick the Hex Inverters
- Drop two inverters on the blank schematics pane
- Update the reference for each gate (U1A and U1B) in the Tool Options window.
- Open the Analog library, and pick the Resistor, and drop it on the schematics pane where resistors are needed. Use the Tool Options window to set the orientation of the resistors to left.
